Changing the scale of your embroidery makes a big difference. The tiny stitching turns into cortes and the giant stitching becomes even more impressive. And don't want to create something impressive?
The technique of stitching larger than the ordinary is much easier than you would expect and only requires simple supplies and your desired sewing.
Embroidery artist Jenny Hart has created a number of monster pieces, including just working with moving stitches.
The embroidery pictured above is not huge, but it is just a sample to show what this type of stitch looks like for embroidery floss, thimble and scale.
If you look closely you will be able to count 111 stitches. Did you count the number of stitches in a 4in x 7in piece of embroidery?
Some of these sizes usually have many more stitches, but the magic of giant stitching means less stitching covers a larger area. In fact, expanding a design into monster proportions will not add a lot of time to your sewing. Your embroidery time will only increase slightly as you follow a few tips that give you the best results.
Supplies for Jumbo Stitching
As with any embroidery, the right supply is good. Giant stitching materials are not very different from what you would normally use, but they are somewhat larger.
Fabric
Choose a fabric that has a large knit that allows the dense thread or yarn to pass through as easily as possible. Osnaburg is a utility fabric that is soft and works well. More rustic however, the monster is great for sewing. Even some types of linen can be a good choice. Just look for some space between warp and waffle.
Hoop
It may be tempting to work on a lot of hoops as used for surprises, but it's good to use extra-large standard Embroidered hoops. Generally, about 10-12in is good. As you work you need to move the hoop around.
Thread
For giant stitches, the larger the thread, the better. Cotton can work well, especially if you find something with larger numbers. The No. 1 Pearl Cotton is the biggest and definitely the boldest to make them! Tapestry wool and other thick embroidered threads are a good choice. You can also use different types of yarn.
As with any of these, you can use multiple "strands" to tighten the lines if your fabric and needle can fit it.
Needle
Select a needle that you can easily thread on any type of thread you are using. It should be able to pass through threads of cloth without sticking. Needles are usually most suitable for turning or chenille.
Extra Large Stitching
Even with the most exposed knit fabric, the thread or yarn you use will get a lot of wear, so start with no more than 24in of thread. Depending on your materials you may even use only 18. Since your stitch is large, the thread should not be too long!
When starting and finishing your monster embroidery, a knot is helpful. It may not be the best embroidery practice for this, but it is less than frustrating.
When you are sewing, always try to pass the index into the knitting fabric. The spaces between the warp and waffle will give the needle and thread or yarn more room and create less wear and tension on the thread.
You probably need to pull the needle each time you take a stitch. Just do not pull, as this can cause the threads of the cloth to break.
Most embroidery stitches will work for giant embroidery. Start with the basics and then expand from there.
One of the most important ways to make your stitch even bigger is to make the stitches bigger. You can at least double the length of your stitches and if the piece has a very high chance of contacting you can go a long way. Just be careful not to stitch the stitches.
If you want to take longer stitches, try using the same technique as caching. Tacking stitches may match the same thread or yarn you are using, or embroidery floss with one or two strands.
Stitch as you normally would but with one exception. When doing satin sewing, you always get up and go back to the opposite side of the area you are usually filling. With giant stitching, get up on the same side you just went down and repeat. Each satin stitch should be right next to the previous stitch. This will prevent puckering of the fabric.
Passing all thread thickness through extra-large needles and fabric, you will see that when you pull the stitches, it leaves a noticeable hole. If this happens, use your nail to work the fibers where they should be.
And that's it! The process really is simple, so grab some supplies and give it a try.
Now, what do you use your embroidery for? It makes for a useful wall hanging, pillow stitch fast, an easy-to-decorate scarf and more. You could even do a huge blanket embroidery in less time than you ever expected!
0 Comments